Hyline Offroad Tube Step Rocker Panel

The Rock Sliders for the 4 door Jeep JK have been designed in such a way that they allow for the Jeep to be able to handle hard core abuse on the trails while they also provide you with a step that you can use every time you get into or out of your Jeep.  As with all of the other Hyline Offroad rock sliders, the area that you step on has a tread plate that is dimpled so that the step is of the non-skid type.  These Rocker Panels has been formed from square steel tubing that is heavy wall as well as with a round steel tubing with a heavy wall being used for the rail of the slider.  Each one of the components is fully welded to the other components and they all have strength that is innate with accessories that are frame mounted. 

Installation does require a bit of drilling but even so, there will not be a need to drill into your Jeep’s body.  These Rock Sliders have been given an E coating finish as well as a top coat powder coat that is quite durable and textured black.  Everything that is necessary for a safe and proper installation is included – this means that you get all of the hardware (grade 8) as well as complete and highly detailed instructions for installation.  HylineOffroad  Made in the USA.

The Tube Step Rocker Panel that is brought to you by the minds at Hyline Offroad has been designed in such a way that it enhances the off road protection that you have for your Jeep.  It features a step area that is wide and is equipped with a tread plate that is dimpled to allow for you to have a safe place to step when you are getting into or out of your Jeep.

Made from a combination of heavy wall steel round and square tubing, this rocker panel will give you the strength that can only be found in products that are mounted directly to the frame of your rig.  Each one of the components has been welded to the other and the entire thing has been given an E coating which has been followed up with a textured powder coat in black to give it additional resistance to corrosion.

Features at a Glance

• These Tube Step Rocker Panels are made with pride by Hyline Offroad right here in the USA
• This product has been designed specifically for the Jeep JK Wrangler model years 2007 – 2015
• Gives your Jeep the additional protection it needs for when you are out on the trails

GenRight Rocker Guards

The Rocker Guards that are made by GenRight have been forged from steel that has a thickness of 3/16 of an inch.  These rock sliders have a height of 6 inches and they will offer you full protection from the front wheel well all the way to the rear wheel well.  Each set of these Rocker Guards comes to you complete with all of the hardware that is necessary for a safe and proper installation and all of the hardware is crafted from stainless steel.  The Rocker Guards have been given a powder coat finish in black.

These Rocker Guards are the best ones that are on the market for Jeeps.  The design is a sleek one that is molded to be able to fit the body shape of your specific Jeep and they have been trail tested and proven.  For anyone in search of a step for their Jeep that doubles as a rocker guard, this is what you have been searching for.

These Rocker Guards were featured in 4 Wheel Drive magazine in 2012 when the editor described them as “Amazing”.

Features at a Glance

• GenRight makes these Rocker Guards with pride right here in the USA
• These Rocker Guards give you the highest ground clearance that you will find on the market today.  They do not hang lower than the body of the Jeep
• This design consists of 3 pieces that tie into various points on the body of the Jeep so that you get the maximum amount of durability
• The shape of these guards has been contoured to fit the curves of the body of your specific Jeep
• These guards wrap all of the way under your Jeep and tie in to the actual body mounts
• With these guards you get full coverage from front to rear wheel wells and they even protect your fender flares
• CNC formed and laser cut from a solid piece of steel plate with a thickness of 3/16 of an inch
• The “Boatside” is smooth and as such it will not get hung up on obstacles on the trails
• These guards will work in conjunction with either the plastic flares that were installed by the factory or with aftermarket metal tube flares
• The design of these guards allows for them to double as a 4 inch step to assist you and your passengers with entering and exiting the Jeep
• These guards are sold in sets of 2 as a kit
• All of the hardware that is necessary for a safe and proper installation is included and it is all made from stainless steel
• These guards are shipped to you as bare steel – however, just recently GenRight has added the option for them to come with an optional powder coat as a finish

Tuffy Security Drink Holders

Rear Drink Holder with 9 Degree Angle

You can add this Tuffy made rink holder right to the back of any of the Tuffy made consoles for the TJ that has a rear that is sloped.  The holes are even already pre-drilled right in the console.  All of the hardware that is necessary for installation comes with the drink holder.  It even includes rubber drink fingers. 

Features at a Glance

• Tuffy makes this drink holder with pride right here in the USA
• This drink holder comes to you complete with a warranty that is quite comprehensive
• Drink holes are oversized at 3 ½ inches
• Rubber drink fingers are including in order to prevent rattling
• All of the hardware that is necessary for installation is included
• This drink holder is made from 16 gauge steel that has been welded
• It has been given a powder coat finish
• Mounts with ease to any surface that has an angle of 9 degrees

Single Drink Holder

This drink holder is able to be mounted to any surface that is flat.  It is great for use in heavy equipment, trucks, cars, SUVs, tractors or on the back side of any of the stereo consoles that are made by Tuffy.  All of the hardware that is necessary for installation is included and this drink holder also has a rubber drink finger that will prevent vibration.

Features at a Glance

• Like all Tuffy products, this drink holder is made with pride right here in the USA
• This drink holder comes to you complete with a warranty that is quite comprehensive
• The hole for your drink is oversized at 3 ½ inches
• There is a rubber drink finger that has been included in order to prevent rattling
• All of the hardware that is necessary for installation has been included
• This drink holder has been forged from 16 gauge steel that has been welded
• It has also been given a durable finish with a powder coat
• This drink holder has a universal design that allows for it to be mounted to any surface as long as the surface is flat 

Standard Drink Holder

This drink holder is similar to the single drink holder in that it can be mounted in any vehicle or on any surface as long as that surface is flat.  It comes to you complete with all of the hardware that is necessary for you to complete the installation.  I also comes with a rubber drink finger to reduce any sort of vibration.

Features at a Glance

• Tuffy makes this drink holder with pride right here in the USA
• This drink holder comes to you complete with a warranty that is quite comprehensive
• This drink holder will hold 2 drinks in its oversized 3 ½ inch holes
• There is a rubber drink finger that will reduce vibration