Sunday, August 16, 2015

Hyline Offroad Tube Step Rocker Panel


The Rock Sliders for the 4 door Jeep JK have been designed in such a way that they allow for the Jeep to be able to handle hard core abuse on the trails while they also provide you with a step that you can use every time you get into or out of your Jeep.  As with all of the other Hyline Offroad rock sliders, the area that you step on has a tread plate that is dimpled so that the step is of the non-skid type.  These Rocker Panels has been formed from square steel tubing that is heavy wall as well as with a round steel tubing with a heavy wall being used for the rail of the slider.  Each one of the components is fully welded to the other components and they all have strength that is innate with accessories that are frame mounted. 

Installation does require a bit of drilling but even so, there will not be a need to drill into your Jeep’s body.  These Rock Sliders have been given an E coating finish as well as a top coat powder coat that is quite durable and textured black.  Everything that is necessary for a safe and proper installation is included – this means that you get all of the hardware (grade 8) as well as complete and highly detailed instructions for installation.  HylineOffroad  Made in the USA.

The Tube Step Rocker Panel that is brought to you by the minds at Hyline Offroad has been designed in such a way that it enhances the off road protection that you have for your Jeep.  It features a step area that is wide and is equipped with a tread plate that is dimpled to allow for you to have a safe place to step when you are getting into or out of your Jeep.

Made from a combination of heavy wall steel round and square tubing, this rocker panel will give you the strength that can only be found in products that are mounted directly to the frame of your rig.  Each one of the components has been welded to the other and the entire thing has been given an E coating which has been followed up with a textured powder coat in black to give it additional resistance to corrosion.

Features at a Glance

  • These Tube Step Rocker Panels are made with pride by Hyline Offroad right here in the USA
  • This product has been designed specifically for the Jeep JK Wrangler model years 2007 – 2015
  • Gives your Jeep the additional protection it needs for when you are out on the trails

Saturday, August 15, 2015

GenRight Rocker Guards


The Rocker Guards that are made by GenRight have been forged from steel that has a thickness of 3/16 of an inch.  These rock sliders have a height of 6 inches and they will offer you full protection from the front wheel well all the way to the rear wheel well.  Each set of these Rocker Guards comes to you complete with all of the hardware that is necessary for a safe and proper installation and all of the hardware is crafted from stainless steel.  The Rocker Guards have been given a powder coat finish in black.

These Rocker Guards are the best ones that are on the market for Jeeps.  The design is a sleek one that is molded to be able to fit the body shape of your specific Jeep and they have been trail tested and proven.  For anyone in search of a step for their Jeep that doubles as a rocker guard, this is what you have been searching for.

These Rocker Guards were featured in 4 Wheel Drive magazine in 2012 when the editor described them as “Amazing”.

Features at a Glance

  • GenRight makes these Rocker Guards with pride right here in the USA
  • These Rocker Guards give you the highest ground clearance that you will find on the market today.  They do not hang lower than the body of the Jeep
  • This design consists of 3 pieces that tie into various points on the body of the Jeep so that you get the maximum amount of durability
  • The shape of these guards has been contoured to fit the curves of the body of your specific Jeep
  • These guards wrap all of the way under your Jeep and tie in to the actual body mounts
  • With these guards you get full coverage from front to rear wheel wells and they even protect your fender flares
  • CNC formed and laser cut from a solid piece of steel plate with a thickness of 3/16 of an inch
  • The “Boatside” is smooth and as such it will not get hung up on obstacles on the trails
  • These guards will work in conjunction with either the plastic flares that were installed by the factory or with aftermarket metal tube flares
  • The design of these guards allows for them to double as a 4 inch step to assist you and your passengers with entering and exiting the Jeep
  • These guards are sold in sets of 2 as a kit
  • All of the hardware that is necessary for a safe and proper installation is included and it is all made from stainless steel
  • These guards are shipped to you as bare steel – however, just recently GenRight has added the option for them to come with an optional powder coat as a finish

Friday, August 14, 2015

Tuffy Security Drink Holders


Rear Drink Holder with 9 Degree Angle

You can add this Tuffy made rink holder right to the back of any of the Tuffy made consoles for the TJ that has a rear that is sloped.  The holes are even already pre-drilled right in the console.  All of the hardware that is necessary for installation comes with the drink holder.  It even includes rubber drink fingers. 

Features at a Glance

  • Tuffy makes this drink holder with pride right here in the USA
  • This drink holder comes to you complete with a warranty that is quite comprehensive
  • Drink holes are oversized at 3 ½ inches
  • Rubber drink fingers are including in order to prevent rattling
  • All of the hardware that is necessary for installation is included
  • This drink holder is made from 16 gauge steel that has been welded
  • It has been given a powder coat finish
  • Mounts with ease to any surface that has an angle of 9 degrees

Single Drink Holder

This drink holder is able to be mounted to any surface that is flat.  It is great for use in heavy equipment, trucks, cars, SUVs, tractors or on the back side of any of the stereo consoles that are made by Tuffy.  All of the hardware that is necessary for installation is included and this drink holder also has a rubber drink finger that will prevent vibration.

Features at a Glance

  • Like all Tuffy products, this drink holder is made with pride right here in the USA
  • This drink holder comes to you complete with a warranty that is quite comprehensive
  • The hole for your drink is oversized at 3 ½ inches
  • There is a rubber drink finger that has been included in order to prevent rattling
  • All of the hardware that is necessary for installation has been included
  • This drink holder has been forged from 16 gauge steel that has been welded
  • It has also been given a durable finish with a powder coat
  • This drink holder has a universal design that allows for it to be mounted to any surface as long as the surface is flat 

Standard Drink Holder

This drink holder is similar to the single drink holder in that it can be mounted in any vehicle or on any surface as long as that surface is flat.  It comes to you complete with all of the hardware that is necessary for you to complete the installation.  I also comes with a rubber drink finger to reduce any sort of vibration.

Features at a Glance

  • Tuffy makes this drink holder with pride right here in the USA
  • This drink holder comes to you complete with a warranty that is quite comprehensive
  • This drink holder will hold 2 drinks in its oversized 3 ½ inch holes
  • There is a rubber drink finger that will reduce vibration

Sunday, May 24, 2015

aFe Large Bore HD Cat – Back Exhaust System


Before we get started with the details about this exhaust system there are a few things that you may want to know:

·         Exhaust tips are not going to be included with the aFe 4 inch large bore exhaust systems

·         You can get these large bore exhaust systems with an straight flow through muffler with a diameter of up to 8 inches when you want something that is supreme at letting air out

·         With the large bore exhaust for diesel engines, you can gain up to 5 horsepower while increasing the flow and torque.  These will also assist in improvement of your fuel economy.  There is not any welding required for installation, they are made from aluminized steel tubing with a diameter of 4 inches.  This tubing has been mandrel bent, has hangers that are adjustable and features bends that are smooth

·         You can choose your aluminized steel in either Tom Kit, Cat Back or Turbo Back

·         Exhaust tips are sold separately but the tips with a 5 inch diameter finish the system perfectly.  They offer an enhanced appearance and a nice sound that is very throaty

·         All of the brackets and hardware necessary for a safe and easy OE installation and included along with very detailed installation instructions

·         Each one of the turbo back systems are intended for off road use.  There may be exceptions if there have been modifications to the catalytic converter in order to retain the necessary parts for them to be considered street legal

The large bore exhaust systems made by aFe has been dyno proven to be able to increase power while reducing EGT.  These diesel exhaust systems have mandrel bends.  Mandrel bends are special because of the fact that they do not squash the tubes like what you see with OE style bends.  While mandrel bends are more difficult to manufacture, they are worth it when it comes to getting the best components for your truck.

The baffle muffler is AEM seam welded and louvered which means that there is no fiberglass for it to blow out.  The design is one that is straight through and will deliver a sound that is both mellow and deep. 

Features at a Glance

·         Adjustable hangers

·         Smooth bends

·         4 inch tubing that has been mandrel bent

·         Hassle free, no welding installation

·         Improves the fuel economy of your truck

·         Increases both flow and torque

·         Adds up to 5 more ponies to your power

These exhaust systems are designed to be able to get more air out on a consistent basis no matter what the conditions are.  This is necessary to getting the most power from your engine and getting the optimum performance from your truck.

Saturday, May 23, 2015

GenRight Rocker Guards


When you want to get the ultimate protection for your Jeep Wrangler look no further than GenRight. You want to be able to be sure you have great guards that will protect your Jeep as well as yourself when climbing in and out of the Jeep.

The best Rocker Guards for a four door Jeep you can get are manufactured by GenRight. The design is made to fit the body shape of the JK Jeep Wrangler and it is tested on the JK Series before release since the year 2008. For anyone that is looking to upgrade their JK Jeep this Rocker Guard is fully functional and includes a step.

The Rocker Guards were a feature in the June issue in 20012 of the 4 Wheel Drive magazine in which the editor of the magazine said that the JK products were among the finest on the planet.

Features at a Glance:

  • These guards have a high ground clearance that does not hang lower than the body
  • The three piece design is able to fit in multiple points for extreme durability
  • Made to fit the curvy body of the JK
  • They wrap completely under the body and can be tied to body mounts
  • Complete coverage from the back to the front including the flares
  • The three sixteenth inch steel plate is laser cut and CNC Formed
  • The smooth Boatside won’t ever get caught up on obstacles along the trail
  • The guards will work with both factory flares as well as the metal tube flares
  • The design is shaped to be a four inch wide step for the Jeeps passengers
  • They are sold in pairs or kits
  • All the hardware mounting is included
  • They are made in the United States
  • Also available in a coated powder finish

The installation of these guards will require some drilling on the mounting location. It comes coated in a silver or black powder finish. The metal step has good foot traction but it may get a little slipper when it gets wet, you may want to apply some grip tape so that you can get better traction on the step and save yourself from any accidental slips or injuries. You will need to do some trimming on the factory flares of about five eighths of an inch. The guards will not fit on a Jeep with lifts that are attached to the bottom of the body. They are available the four door as well as the two door models.

So be sure to go for the very best in Rocker Guards for your Jeep and get GenRight products for a guaranteed satisfaction.

Rugged Ridge RRC Rocker Guards


Rugged Ridge makes Rocker Panel Guards that are perfect for the protection of the area near your rocker panels on your Jeep Wranglers. You will have maximum protection with these heavy-duty panels. The panels are made with a steel panel that is three quarters of an inch thick and a textured black finish. The guards can take a good beating and give you extreme protection on your next off-road excursion. There are some other features that can prove to be very useful, from the two inch step and the cutouts that can be used with a jack. They also come with mounting instructions and all the hardware needed to install.

These rocker panels are made to take a beating from debris, rocks, and any stones that can be kicked up from the road making them in need of auto body repair. If you have a Jeep that is damaged you can hide them with the guards, and if they are in good shape then you can provide protection for them.

The Rugged Ridge Rocker Panels are made to be compatible for almost all aftermarket flares. There is weatherstripping attached to the guards to help protect the paint and body of your Jeep Wrangler. The best part of these guards is the five year limited warranty that comes along with them.

Rugged Ridge is the frontrunner in Jeep substitution parts, they are a division of Omix-Ada. Rugged Ridge home office is in Georgia and got its start nearly twenty years ago when its leaders came to the conclusion that even a tough vehicle like a Jeep could be made to be better than it was. Ever since its inception the company has made over five hundred accessories to help you improve your Jeeps appearance, performance, and utility. Every accessory made by Rugged Ridge designs, tests and manufactures all these parts and then retests them; they know that the parts need to be up to the strength and durability of a Jeep. Once this process is complete they are finally ready to be installed on your Jeep Wrangler.

Features at a Glance

·         Your Rocker panels will have extreme protection

·         The panels work with almost all aftermarket flares

·         Made with three sixteenth inch steel plates

·         They have a rugged textured black finish

·         The guards have two inch steps

·         Has cutouts for off-road jacks

·         The backsides have weatherstripping to protect the paint and body of your Jeep

·         All hardware and instructions are included

·         Some drilling will be required

·         Has a five year limited warranty

So when it comes to the ultimate in protection for your Jeep be sure to check out Rugged Ridge for their RRC Rocker Guards.

Friday, May 22, 2015

Smittybilt SRC Rocker Guard with Plate


The SRC Rocker Guards that are made by Smittybilt give you the ultimate when it comes to protection for the rocker area of your Jeep.  Instead of having only a single tube as with many guards, this particular one consists of 2 tubes that each have their own supports.  This gives your Jeep protection from the front wheel all the way back to the rear wheel as well as from the underside of your Jeep clear to the full rocker panel.  These guards have been made from .120 wall steel tubing that has a diameter of 2 inches and is very heavy duty.  They have also been given a two stage powder coat finish in matte black.  Installation is a simple process as they just bolt right on to the Jeep.  There is no need for any sort of drilling, cutting welding or other modifications to be made to your Jeep to accommodate for installation.

Features at a Glance

·         The SRC Rocker Guards with Plate that are brought to you by the minds at Smittybilt have been made with pride right here in the USA

·         These guards come to you complete with a warranty against manufacturer defects that is good for a lifetime

·         They also come to you with a warranty on the finish that is good for a full 5 years

·         With these Rocker Guards with Plate you will be getting maximum protection for the rocker panels of your Jeep that goes from the front wheel all the way back to the rear wheel.  This protects not just the rocker panels from damaging impacts but also the underside of your Jeep

·         These guards will prevent your rocker panels from getting hung up on obstacles that dig in to the sheet metal

·         The heavy duty steel tubes used to make these guards are .120 wall and have a diameter of 2 inches

·         The design of these guards is a one piece design that consists of 2 guards and a plate

·         The finish is a matte black powder coat that adds to the aesthetic value of the guards as well as imbuing them with resistance against corrosion

·         Installation is simple and requires that you bolt the guards to the front body mount brackets and the rear ones.  There is no need for any sort of drilling, cutting or welding

·         These guards are available for both 2 and 4 door Jeep models

·         When you get these bars, you will also get all of the hardware that is necessary for a safe and proper installation and this does include installation instructions that are complete and highly detailed

When you want protection for your Jeep that is done right, you want Smittybilt.